TP support / wall and support bracket FS
Item no. 6364209 | EAN 4012196199099
- Product description
-
Product descriptionTP profile for use as lightweight support on horizontal concrete ceilings, on length 145–645 mm. Up to length 345 mm, the profile is used as a lightweight wall and support bracket.
In combination with the wall and support bracket, type TPSA/145, head reinforcement can be implemented with two fixing points. Important! If the profile is fixed directly to the ceiling or the profile is screwed together as head reinforcement, then, for reasons of stability, always use the spacer, type DS 4. For enmeshed profile mounting, use the truss-head bolt FRS 10/25 S. When mounting the profiles opposite each other (e.g. head reinforcement), use the hexagonal bolt, type SKS 10/60.
-
- Technical data
-
Technical data
Colour zinc Dimension B245mm F in kN 0,9 kN for width max. 200 mm for width min. 200 Maintain electrical functions no Material Steel Rustproof steel, pickled no Surface Strip galvanised Version for Wall and support bracket Dimensions
Dimension B 60 mm Dimension H 120 mm Dimension L 245 mm Height 120 mm Length 245 mm Width 60 mm CO2 footprint (Product Carbon Footprint)
CO2 Footprint (GWP) Cradle-to-Gate 1,0808 kg CO2e / 1 Piece CO₂ Footprint (GWP) 1,0808 kg CO₂e Declared Unit (LCA) Units Declared Unit Quantity (LCA) 1 Determination date of CO2 value 2025-05-14T00:00:00.000+0200 Technical data
Load diagram, bracket, type TPSA
- All types
- Downloads
-
Data sheet TPSA 245 FS / 6364209 , 0.29MB , pdfEU declaration of conformity TPSA 245 FS / 6364209 , 0.10MB , pdfUK Declaration of Conformity TPSA 245 FS / 6364209 , 0.09MB , pdfREACH Declaration of conformity TPSA 245 FS / 6364209 , 0.12MB , pdfRoHS Declaration of conformity TPSA 245 FS / 6364209 , 0.12MB , pdfEnvironmental Product Declaration (EPD) TPSA 245 FS / 6364209 , 1.48MB , pdfMounting instructions General information on the mounting , 2.65MB , pdfMounting instructions Mounting instructions, TP support systems , 0.04MB , pdf
End cap
Spacer FS